• +86-371-68097667
  • service@stongboiler.com

Tag Archive how to clean gas boiler

how to clean gas boiler

How to Clean  Gas Boiler: Cleaning your  gas boiler becomes a necessary activity after some time has passed since having it installed. Because of its almost non-stop work, dust mixed with the heat condensation may start obstructing your tubes and pipes, making it less efficient with time. Gas boilers are commonly used for water heating, or for heating homes. Turning your heating system to natural gas is probably one of the best decisions you could make, since gas boilers will save you plenty money. However, as in most gas fueled appliances, proper maintenance should be performed regularly to ensure a optimum heat delivery, and to prevent fire hazards and personal injury. 

how to clean gas boiler

how to clean gas boiler

How to Clean Gas Boiler  – Periodically it helps to check and clean the gas boiler for a couple of reasons. First of all, it ensures the boiler are in proper mechanical order. Additionally, that the boiler will reliably do the job of properly and evenly burning the gas in the combustion chamber. It also adds life to the gas boiler  if the boiler are properly cleaned. Little things like insects and dust and dirt can be removed. Furthermore, this enhances the combustion process making things more efficient and reliable. Before doing this procedure, consult a professional if there is any doubt. Safety first.

The tips about how to clean gas boiler

Cleaning the Tubes: By removing all mentioned above, you’ll have access to the heat exchanger. Use your brushes to start cleaning the insides, taking the dust off the tubes all the way down to the base of the heater. After the dust if off, wash the burner tubes with clean water and let dry.

Cleaning the Complete Unit: Once you are done cleaning the tubes, start cleaning the bottom of the unit and its surroundings with the vacuum cleaner. This way, you’ll be sure that the area where the gas boiler is located is clean as well. For the natural gas boiler to work properly, everything around it should be unobstructed.

Putting it All Back Together: Having cleaned all the separate parts and surrounding areas, it’s time to put it all back together. Use the pictures in your digital camera as a reference. Place the burner tubes back first, then the vent sack and unit covers. Make sure to also clean the vent sack with your brushes, or wash with water if necessary. The vent sack of your natural gas boiler should be obstruction-free.

Testing and Restarting: After putting everything back together, turn your power back on and let the thermostat go all the way up to start the boiling cycle. You should be seeing a regular blue flame, with a slight orange color.

Remember to have your gas boiler checked at least once a year by a professional maintenance service provider, especially if you have had if for more than 2 years running. Usually, newer models are safer to operate. Still, you must be careful when working with  gas appliances. If you suspect any problems, get in contact with professional assistance right away.